Proper water management is crucial when establishing a new lawn on your residential property. In simple terms, it is important to plan for efficient irrigation of the turf to ensure healthy grass growth and minimise water wastage. Often, homeowners assume that constant watering is essential for a lush lawn. As a result, a lot of water is wasted on the young grass, and the plants become more vulnerable due to waterlogging and erosion. Here are some basic irrigation guidelines to keep in mind for efficient turf establishment.
Calculate Water Needs
When seeding your new lawn, you should have a clear understanding of the water requirements. In general, the moisture needs will depend on the type of grass being planted. If you would like to minimise your irrigation demands, you should opt for indigenous species which can withstand local climatic conditions. You should also note that the watering requirements will change for different stages of the turf. Therefore, consider using a temporary irrigation set-up for the early stages of the lawn. You can switch to a more permanent set-up when the grass matures.
Compare Irrigation Systems
One of the common causes of water loss and inefficiency on lawns is the choice of irrigation system. Simply speaking, if the lawn is watered through sprinklers or other surface methods, the plants will not maximise on the moisture. This problem is prominent in most hot areas which experience high rates of evaporation. Therefore, if you are concerned about water losses due to high temperature, consider using a drip-line. The drip design delivers the water as close as possible to the roots, minimising losses to the atmosphere.
Monitor the Rainfall
An efficient irrigation set-up must take into account the rainfall in the local area. Keep in mind that watering your young turf while there is sufficient rain will be detrimental. For instance, there will be more erosion as the excess water flows through your landscape. So, you should monitor the weather and make adjustments to your irrigation plans. If you have a manual system, you will need to plan for shut-off. Where possible, install rain or soil moisture sensors to ensure maximum efficiency.
Maintain the System
Finally, it is important to make certain that your irrigation set-up is in good condition at all times. A leaking system will increase your water losses and, subsequently, your expenses. On the other hand, if the faulty equipment is blocked, the young grass will not get enough moisture. Therefore, you should engage irrigation or landscaping specialists for system servicing.
Contact grass establishment immigration contractors for more information.